Metal Man Restoration cleans and maintains architectural and decorative metal in Brooklyn homes, brownstones, prewar apartment buildings, and storefronts. We clean, refinish, and protect bronze, brass, copper, stainless steel, and anodized aluminum, and we set up ongoing maintenance so a finished restoration stays finished instead of slowly going back to where it started.
Brooklyn Metal We Clean and Maintain
- Copper sinks, bar tops, and backsplashes in kitchens and baths
- Bronze and brass entrances on apartment buildings and brownstones
- Prewar lobby metal such as mailboxes, elevator doors, directories, and trim
- Stainless steel in lobbies, elevators, and commercial interiors
- Storefront metal on commercial streets across the borough
What Ongoing Maintenance Includes
A maintenance program is a scheduled visit rather than a rescue. We clean the metal, address early corrosion before it becomes damage, touch up or renew protective coatings, and report anything that needs a larger repair.
Each visit is a far smaller job than restoring the same metal a second time.
Why Brooklyn Metal Needs a Maintenance Plan
Exterior metal in Brooklyn takes the full weather cycle plus winter salt and street grime, and lobby and kitchen metal take constant hand contact and water. Protective coatings do not last forever.
Once a coating fails, corrosion starts underneath and the next intervention is a restoration rather than a cleaning. Copper is the clearest case: it darkens naturally with use, and regular care is what keeps it bright.
Metal Man’s Cleaning and Maintenance Experience
In October 2026 we polished a copper kitchen sink onsite in a Park Slope home. The basin had oxidized to a dark, blotchy finish with water spots and streaks, and polishing brought it back to bright copper. The same month we cleaned and polished a hammered copper bar top and backsplash onsite on Manhattan’s Upper West Side.
On larger buildings, we cleaned every exterior aluminum and stainless steel element on the Niagara Mohawk Building in Syracuse from suspended scaffolding and sealed it with a protective wax coating. See our architectural metal maintenance program for how a schedule is structured.
Neighborhoods We Serve Across Brooklyn
Brownstone and row house entrances in Park Slope, Brooklyn Heights, Fort Greene, Clinton Hill, and Bedford-Stuyvesant, Victorian houses in Ditmas Park and Flatbush, lofts and former industrial buildings in DUMBO and Williamsburg, and prewar apartment lobbies across the borough.
If the metal needs more than cleaning, we also handle architectural metal restoration in Brooklyn. If we restored it, we can keep it that way.
Common Questions About Metal Cleaning and Maintenance in Brooklyn
These are the questions Brooklyn homeowners, property managers, and boards ask before setting up maintenance.
How often should architectural metal be maintained?
It depends on exposure. Interior lobby metal usually needs less frequent attention than an exterior bronze entrance taking weather and salt. We set the interval after looking at the specific metal, its coating, and where it sits.
Can you maintain metal you did not originally restore?
Yes. We assess the current condition and coating first, because taking over maintenance sometimes means correcting an earlier finish before a schedule makes sense.
Can a darkened copper sink be brought back?
Yes. Copper darkens naturally with use, and polishing removes the oxidation and returns the basin to bright copper. That is the work we did onsite on the Park Slope sink, and it can be repeated on a schedule that suits you.
Is the work done onsite?
Maintenance is almost always onsite, scheduled around building hours so lobbies and entrances stay usable. Only pieces needing full restoration come back to the shop.
What is an architectural metal maintenance program?
A recurring scheduled service covering cleaning, coating renewal, and condition reporting on your building’s metal, at an interval set by exposure. It protects the investment already made in restoration.
For other boroughs, see metal cleaning and maintenance in Manhattan and metal cleaning and maintenance in the Bronx.
Keep Your Brooklyn Metal Looking Its Best
To set up cleaning or maintenance for your Brooklyn home or building, fill out the form below or call (914) 662-4218.
Projects Like This
Real projects from our own shop and job sites. Every one of these is work we did ourselves.
Park Slope Brooklyn - Copper Sink Polishing
In October 2026, Metal Man Restoration polished a copper kitchen sink onsite in a home in Park Slope, Brooklyn.
View the project
Upper West Side NYC - Copper Bar and Backsplash Polishing
In October 2026, Metal Man Restoration provided onsite metal cleaning and maintenance for a hammered copper bar top...
View the project
Niagara Mohawk Building - Syracuse NY
The Niagara Mohawk Building is a classic Art Deco landmark in Syracuse, New York. Built in 1932 as the headquarters...
View the project
I recently had a rare late 19th century American brass table restored at Metal Man. The table had not been polished or cleaned in 140 years. Anthony and his staff completely disassembled the table, and over the next 4 months completely restored and polished it to its original finish. The result...
Our Clients
We serve a diverse range of clients, including homeowners, contractors, antique dealers, hardware companies, insurance companies, restoration companies, and collectors.